Ingenext

BOOST 50 TO GHOST FOR TESLA MODEL 3/Y

$1,295

Switch your Boost 50 for a Ghost! If you have already purchased a Boost 50 and want to have the Ghost upgrade, this product is for you! 980 motor is required

To be eligible for this product, you must have purchased your Boost 50 from us or one of our installers. 

  • The update transforms your dual motor into a Performance
  • It adds 150 HP to your car...
  • You'll be able to do 0-60 MPH in 3.2 seconds
  • Improves throttle sensitivity: reduced response time
  • You'll have access via a web browser on your smartphone, tablet or laptop to the Lap mode, drift mode (a special driving mode that disables traction control but maintains ABS and power Steering), battery heating and automatic driver's door opening on approach and much more !

INSTALLATION

To Install the Ghost we will need to reflash your motor remotely.

The Ghost DIY kit comes with the installer kit tools. You will need to provide us a Teamviewer connection on your laptop plugged to the tool and you car. 

  1. Open the interior panel located at the foot of the front passenger seat, under the glove box.
  2. Install the modules and harness to the MCU.
  3. Plug our tools to the modules harness.
  4. Give us access to your laptop via Team Viewer.
  5. Press the brake pedal.
  6. Give us 15 min to reprogram your motor.
  7. Remove the tools and plug the modules.
  8. Close the panel.

You will receive detailed instructions with your module. Note that once installed in your vehicle, the product cannot be used on other vehicles . Charges apply for any changes. 

THE USER MANUAL 

Please, read the USER MANUAL  after installing the product. You'll find all the info about how to log in the Ingenext web app, about the features and much more. 

WIFI COMMUNICATION

The Ghost communicates with your smartphone, tablet or laptop via WIFI. To get acces to the ingenext web app, you must be near the module and follow the steps in the user manual. 

TESLA UPDATES

To make a Tesla update, you will be able to authorize it from the Ingenext web application and proceed to its installation. Before installation, you need to make sure that the update is safe here. 

INGENEXT UPDATES

You'll be able to update your module with the cable provided with your module. 

  • Ingenext may send you updates to add features or fix bugs.  
  • If needed, adjustments to the program can be deployed to restore functions affected by the manufacturer's vehicle updates

IMPACT ON THE MANUFACTURER'S WARRANTY

When visiting a Service Center or when a technician visits your home, it is recommended that you remove the device beforehand. Any purchaser or user of the Ghost upgrade releases Technologies Ingenext and all its related companies from any responsibility regarding the full or partial validity of the manufacturer's warranty following the use of this equipment. We are not responsible for any modifications the manufacturer could do to your car (ex: turning off some features etc.).

This product will only work if you have a Tesla model 3 DUAL MOTOR with the motor 1120980-00-... It doesn't work for Standard Range or Long Range RWD. To be eligible for this product, you must have purchased your Boost 50 from us or one of our installers. 

*CUSTOMS CHARGES ARE AT THE BUYER'S EXPENSE*

You may also like

Recently viewed