Support kit + Diagnostic wire

The necessary kit to help you remotely! : 

• Plug the two obd2 port between the T connector and the Ingenext module
• Three DB9 are available to log and flash

1. MCU is Vehicle CAN on MCU side
2. CAR is vehicle CAN on car side
3. 3CH is Chassis Can

• This tool will be used to log the can and reflash some module. The ingenext technician will tell you which db9 channel to connect it to.

BYPASS

• The bypass will be useful to remove the module and plug the car like originally. Can be plug to the T connector or the log and flash cable.

USB MODULE UPDATE CABLE

•  This is a cable USB A to USB A used to reprogram the module via a software or remotely. Plug one side in the module and the other in the laptop

HARNESS

• ?The harness to interface the CAN networks
  

TESLA DIAGNOSTIC WIRE