$487.50 $650

Switch your Bonus module for a Boost 50 ! If you have already purchased a Bonus module and want to have the Boost 50, this product is for you!

To be eligible for this product, you must have purchased your Bonus module from us or one of our installers. 

The Boost 50 increases the performance of the Tesla Model 3 Dual, without the "Performance" option.

  • Acceleration time for Model 3 from 0 to 60 mph : 3.7 seconds
  • Total power: increase of 50 HP
  • Improves throttle sensitivity: reduced response time
  • Heated rear seat control with web application or rear window switches
  • Ambient lights
  • Automatic driver door opening
  • Automatic frunk and trunk opening with proximity sensors*
  • Drift mode (a special driving mode that disables traction control but maintains ABS and power Steering)
  • Battery pack heating
  • Manual wiper control
  • Blocks TPMS alerts (BLE only)
  • Live data: battery pack state of health, beginning of life pack energy, full nominal pack energy, isolation resistance of the battery, HV battery voltage/current, LV battery voltage/current, battery and charger temperature
  • You'll still have access to Tesla's firmware updates

*Lift Support not included, you have to buy it separately like these :

See Video on Youtube



Please, read the USER MANUAL  after installing the product. You'll find all the info about how to log in the Ingenext web app, about the features and much more. 



Installing the Boost 50 is very simple and only takes a few minutes. The steps for installation are detailed in the INSTALLATION INSTRUCTIONS

  1. Turn off your car, select SAFETY & SECURITY from the menu and press POWER OFF. 
  2. Open the interior panel located at the foot of the front passenger seat, under the glove box.
  3. Plug the two connectors of the module.
  4. Close the panel.
  5. Turn on you car, by pressing the brake pedal. 

Note that once installed in your vehicle, the product cannot be used on other vehicles . Charges apply for any changes. 


The Boost 50 communicates with your smartphone, tablet or laptop via WIFI. To get acces to the ingenext web app, you must be near the module and follow the steps in the user manual. 


To make a Tesla update, you will be able to authorize it from the Ingenext web application and proceed to its installation. Before installation, you need to make sure that the update is safe here. 


You'll be able to update your module with the cable provided with your module. 

  • Ingenext may send you updates to add features or fix bugs.  
  • If needed, adjustments to the program can be deployed to restore functions affected by the manufacturer's vehicle updates


    When visiting a Service Center or when a technician visits your home, it is recommended that you remove the device beforehand. Installation and removal takes only a few minutes. Any purchaser or user of the Boost 50 module releases Technologies Ingenext and all its related companies from any responsibility regarding the full or partial validity of the manufacturer's warranty following the use of this equipment. We are not responsible for any modifications the manufacturer could do to your car (ex: turning off some features etc.).

    This product will only work if you have a Tesla model 3 DUAL MOTOR. It doesn't work for Standard Range or Long Range RWD.

    Acceleration time may vary depending on outdoor conditions and the conditions of your car.


    You may also like

    Recently viewed